Tire shredding and recycling

Tire Shredders and Complete Recycling-Line Solutions

According to tire size, output and finished product requirements, match 300-2000 type equipment

Supports standalone twin-shaft shredder selection, tire pretreatment and complete recycling-line planning; the final configuration is confirmed from tire size, target throughput, output size and site conditions.

Submit tire information and get selection View model parameters

Zhuowen Machinery Tire Recycling Production Line

10 gears300-2000 type equipment coverage

Category 8Common waste tire applications

7Tire recycling process module

4 itemsInformation completes preliminary selection

Determine project goals first

Choose a single machine for volume reduction, or configure a complete tire recycling line

Suitable for existing front-end and back-end equipment

Double shaft tire shredder stand-alone solution

It is used for coarse crushing and volume reduction of whole tires or pre-processed tires, and provides stable material supply for subsequent screening and separation processes.

View model →

Suitable for continuous large-scale processing

Tire recycling production line solution

From feeding and shredding to wire separation, fiber sorting and particle or rubber powder collection, it is configured according to the finished product.

View the process →

Application tiresCommon waste tire processing range

Quickly confirm the applicable scope by tire type

car tires

Passenger car tires · 01

Truck/Bus Tires

Commercial vehicle tires · 02

Engineering machinery tires

Large tires · 03

Agricultural machinery tires

agricultural tires · 04

motorcycle tires

small tires · 05

Solid tires

high density rubber · 06

Beads / tire scraps

Preprocessing materials · 07

Other scrap tires

Customized materials · 08

Model + parameters

300–2000 Equipment Specifications

Tire equipment and plastic shredding equipment use the same set of model parameters; the specific tool and entire line configuration are confirmed based on tire specifications, feeding status and target output.

Confirm tire typeCar tires, truck tires, engineering tires or other tires

Measure maximum sizeProvide outer diameter, width, unit weight and whether to be bead removed

Clarify processing goalsProduction per hour, tire blocks, pellets or rubber powder

model	Working chamber size (mm)	Overall machine size (mm)	Motor power	Reducer	Blade specifications	Spindle diameter (mm)
300	300 × 300 × 300	2000 × 1100 × 1200	7.5 kW × 2	ZQ-300 × 2	Φ150 × 20 / 15 pieces	Φ80
400	400 × 400 × 360	2500 × 1200 × 1300	11 kW × 2	ZQ-400 × 2	Φ200 × 20 / 20 pieces	Φ100
600	600 × 500 × 300	3000 × 1400 × 1600	15 kW × 2	ZQ-600 × 2	Φ250 × 30 / 20 pieces	Φ120
800	800 × 700 × 400	3200 × 1600 × 1800	30 kW × 2	ZSY-280 × 2	Φ350 × 40 / 20 pieces	Φ160
1000	1000 × 800 × 450	3600 × 1800 × 2000	45 kW × 2	ZSY-355 × 2	Φ400 × 40 / 25 pieces	Φ180
1200	1200 × 900 × 500	4200 × 2000 × 2200	55 kW × 2	ZSY-400 × 2	Φ450 × 40 / 30 pieces	Φ220
1400	1400 × 1000 × 550	4400 × 2000 × 2400	75 kW × 2	ZSY-450 × 2	Φ500 × 50 / 28 pieces	Φ240
1600	1600 × 1200 × 650	5000 × 2200 × 2800	110 kW × 2	ZSY-560 × 2	Φ600 × 60 / 26 pieces	Φ300
1800	1800 × 1300 × 700	7000 × 2400 × 3000	132 kW × 2	TB-17 × 2	Φ650 × 60 / 30 pieces	Φ320
2000	2000 × 1400 × 800	9000 × 2500 × 3200	160 kW × 2	TB-18 × 2	Φ700 × 60 / 33 pieces	Φ340

The actual processing capacity is affected by tire type, size, steel wire content, feeding status and discharging requirements. The final model is subject to material testing and technical confirmation.

Assembly line supporting

Configure the Complete Line Around the Target Product

Tire specifications and finished product requirements are different, and the process routes are also different.Tell us about tires and production →

Basic tire processing line: loading, twin-shaft shredding, screening and tire block collection

01Flexible basic configuration

basic processing

Shred first, then reorder as needed

Suitable for starting as a stand-alone machine

It completes the coarse crushing and volume reduction of whole tires or pre-processed tires. It can directly collect tire blocks and can also provide stable material for subsequent screening and separation processes.

01Feeding
02Double shaft shredding
03Screening returns
04tire block collection

suitable materialCar tires, truck tires, pre-treated tiresproduction methodIntermittent or continuous processingend useVolume reduction, primary shredding or transfer to the next stage

Get base line configuration →

Complete tire recycling production line: from complete tire loading to rubber granule and rubber powder collection

02Large-scale recycling solutions

Complete recycling

From whole tire to pellets/rubber powder

continuous automation

Focusing on the process designed backwards from the target product, shredding, screening, wire separation, fine crushing and fiber sorting are combined into a continuous production line.

01Feeding
02Shredding and screening
03Wire separation
04fine crushing
05Sorting and collection

suitable materialCar tires, truck tires and custom tiresproduction methodContinuous automated productionfinal productRubber granules, rubber powder and steel wire

Get the whole line solution →

Process module7 process modules, combined on demandStarting from one piece of equipment, it can also be gradually expanded to a complete tire recycling line.

01Feeding and conveying02Double shaft shredding03Screening returns04Wire separation05fine crushing06Fiber sorting07Granule/rubber powder collection

Same material · process display

From complete tire to target product

The waste tire raw materials, continuous shredding process, and three typical finished products of tire blocks, rubber granules and rubber powder are displayed in sequence.

Weared scrap tires of different specifications naturally stacked in the recycling workshop

Before processing: scrap tires

Raw material status: Mixed specifications, natural wear, feed to be sorted

The waste tires are fed into the twin-shaft shredder by the conveyor and the tire fragments are output

Operation process: tire shredding

Observation points: Continuous feeding and stable discharging

Three stainless steel shallow trays hold tire blocks, rubber granules and fine rubber powder respectively.

After processing: tire blocks / granules / rubber powder

Finished product status: Coarsely shredded tire blocks, uniform rubber particles, fine rubber powder

Selection questions and answers

Before making an inquiry, clarify the key issues first

This information will directly affect the feeding method, working chamber size, motor configuration and back-end process.

Which set of model parameters does the tire shredder use?

The tire page and the plastic page use the same parameter table of the 300-2000 double-shaft shredder. In actual projects, the cutting tools and entire line configuration will be adjusted based on tire size, steel wire content, feeding status and target products.

How should I initially select the 300-2000 model?

First check whether the maximum tire size can enter the working chamber, and then determine the power and blade configuration based on the weight of the single piece, target output and material discharging requirements. It is recommended to also provide photos of the tire, outer diameter, width and whether the bead has been removed.

What is the difference between just buying a single machine and configuring a complete recycling line?

The stand-alone solution mainly completes tire volume reduction and coarse shredding; the complete recycling line will combine modules such as screening, wire separation, fine crushing, fiber sorting and collection around the target product.

What is the difference between rubber particle line and rubber powder line?

The particle line aims at classifying rubber particles; the rubber powder line needs to continue fine grinding, classification and dust removal after the particle section. The specific particle size and equipment configuration are to be confirmed with project data.

What information is more effective to prepare before inquiry?

Prepare photos or videos of the tire, tire type, maximum outer diameter and width, whether it has been beaded, target output per hour, and whether you want tire blocks, rubber granules or fine rubber powder.

Get a Recommendation

Send Four Key Project Details to Define the Right Configuration

Fill in the tire type, maximum size, target output and target product, and we will judge the single machine model or entire line process accordingly.

Model parameters Get a Recommendation